{"title":"Mazda Silicone Hose Kits","description":"","products":[{"product_id":"mazda-mx5-mk1-na-1-6-silicone-radiator-hose-kit","title":"Mazda Mx5 MK1 NA 1.6 Silicone Radiator Hose Kit","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality reinforced silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ethe upper and both lower radiator hoses\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the engine bay listed below. The hoses fit all Mx5 MK1 1.6 models.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUpper Radiator Inlet Hose\u003c\/li\u003e\n\u003cli\u003eLower Radiator Outlet to Hard Pipe Hose\u003c\/li\u003e\n\u003cli\u003eLower Radiator Hard Pipe to Block Hose\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is available with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\" alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most heavy duty clamps we supply, and are also 100% stainless steel to prevent rust. However they are much more expensive and, like the Worm-Drive clamps provide a slightly less evenly distributed clamping force than the Spring clamps. For this reason we recommend using them for Turbo applications (intercooler\/intake hoses) where high boost can cause hose blow-off's and the additional clamping force is useful. Some customers like to use T-Bolt clamps for all hoses on their vehicle however so we offer them as an option for most of our kits.\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata\/Eunos NA (MK1) Chassis '89-'98 | 1.6 B6-ZE Engine | Manual \u0026amp; Automatic Transmissions | RHD \u0026amp; LHD Models\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ None","offer_id":53817875661129,"sku":"MX5NA-0004-B","price":43.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ T-Bolt","offer_id":53817875693897,"sku":"MX5NA-0004-B-TC","price":53.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ SS Worm Drive","offer_id":53817875726665,"sku":"MX5NA-0004-B-CK","price":47.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53817875759433,"sku":"MX5NA-0004-B-SC","price":49.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ None","offer_id":53817875792201,"sku":"MX5NA-0004-R","price":43.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ T-Bolt","offer_id":53817875824969,"sku":"MX5NA-0004-R-TC","price":53.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53817875857737,"sku":"MX5NA-0004-R-CK","price":47.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Black Spring Clips","offer_id":53817875890505,"sku":"MX5NA-0004-R-SC","price":49.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ None","offer_id":53817875923273,"sku":"MX5NA-0004-BLK","price":43.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ T-Bolt","offer_id":53817875956041,"sku":"MX5NA-0004-BLK-TC","price":53.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ SS Worm Drive","offer_id":53817875988809,"sku":"MX5NA-0004-BLK-CK","price":47.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ Black Spring Clips","offer_id":53817876021577,"sku":"MX5NA-0004-BLK-SC","price":49.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk1-na-16-silicone-radiator-hose-kitsilicone-hose-kitrace-rally-suppliesmx5na-0004-b-9323931.jpg?v=1773298394"},{"product_id":"mazda-mx5-mk1-na-1-8-silicone-radiator-hose-kit","title":"Mazda Mx5 MK1 NA 1.8 Silicone Radiator Hose Kit","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality reinforced silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ethe upper and both lower radiator hoses\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the engine bay listed below. The hoses fit all Mx5 MK1 1.8 models.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUpper Radiator Inlet Hose\u003c\/li\u003e\n\u003cli\u003eLower Radiator Outlet to Hard Pipe Hose\u003c\/li\u003e\n\u003cli\u003eLower Radiator Hard Pipe to Block Hose\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is available with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\" alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most heavy duty clamps we supply, and are also 100% stainless steel to prevent rust. However they are much more expensive and, like the Worm-Drive clamps provide a slightly less evenly distributed clamping force than the Spring clamps. For this reason we recommend using them for Turbo applications (intercooler\/intake hoses) where high boost can cause hose blow-off's and the additional clamping force is useful. Some customers like to use T-Bolt clamps for all hoses on their vehicle however so we offer them as an option for most of our kits.\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata\/Eunos NA (MK1) Chassis '89-'98 | 1.8 BP-4W Engine | Manual \u0026amp; Automatic Transmissions | RHD \u0026amp; LHD Models\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ None","offer_id":53817884082505,"sku":"MX5NA-0005-B","price":41.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ T-Bolt","offer_id":53817884115273,"sku":"MX5NA-0005-B-TC","price":51.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ SS Worm Drive","offer_id":53817884148041,"sku":"MX5NA-0005-B-CK","price":45.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53817884180809,"sku":"MX5NA-0005-B-SC","price":47.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ None","offer_id":53817884213577,"sku":"MX5NA-0005-R","price":41.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ T-Bolt","offer_id":53817884246345,"sku":"MX5NA-0005-R-TC","price":51.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53817884279113,"sku":"MX5NA-0005-R-CK","price":45.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Black Spring Clips","offer_id":53817884311881,"sku":"MX5NA-0005-R-SC","price":47.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ None","offer_id":53817884344649,"sku":"MX5NA-0005-BLK","price":41.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ T-Bolt","offer_id":53817884377417,"sku":"MX5NA-0005-BLK-TC","price":51.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ SS Worm Drive","offer_id":53817884410185,"sku":"MX5NA-0005-BLK-CK","price":45.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ Black Spring Clips","offer_id":53817884442953,"sku":"MX5NA-0005-BLK-SC","price":47.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk1-na-18-silicone-radiator-hose-kitsilicone-hose-kitrace-rally-suppliesmx5na-0005-b-1007348.jpg?v=1773298347"},{"product_id":"mazda-mx5-mk1-na-1-6-silicone-brake-booster-servo-hose-valve","title":"Mazda Mx5 MK1 NA 1.6 Silicone Brake Booster Servo Hose \u0026 Valve","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ethe brake servo to inlet manifold vacuum hose\u003c\/strong\u003e. The stock hose has an internal one-way check valve to maintain vacuum in the brake servo, this kit includes a new one-way valve to retain proper brake efficiency from the servo. This kit fits all right hand drive (RHD) MK1 1.6 MX5\/Miata\/Eunos models, it will\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003enot\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efit LHD models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit comes with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to clamp size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\" alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e* Not available for this product *\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata\/Eunos NA (MK1) Chassis '89-'98 | 1.6 B6-ZE Engine | Manual \u0026amp; Automatic Transmissions | RHD Models Only\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ SS Worm Drive","offer_id":53817906102601,"sku":"MX5NA-0009-B-VC","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53817906135369,"sku":"MX5NA-0009-B-VSC","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53817906233673,"sku":"MX5NA-0009-R-VC","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ Black Spring Clips","offer_id":53817906266441,"sku":"MX5NA-0009-R-VSC","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ SS Worm Drive","offer_id":53817906364745,"sku":"MX5NA-0009-BLK-VC","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Black Spring Clips","offer_id":53817906397513,"sku":"MX5NA-0009-BLK-VSC","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk1-na-16-silicone-brake-booster-servo-hose-valvesilicone-hose-kitrace-rally-suppliesmx5na-0009-b-vc-2925192.jpg?v=1773298343"},{"product_id":"mazda-mx5-mk1-na-1-8-silicone-brake-booster-servo-hose-valve","title":"Mazda Mx5 MK1 NA 1.8 Silicone Brake Booster Servo Hose \u0026 Valve","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThis high quality silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ethe brake servo to inlet manifold vacuum hose\u003c\/strong\u003e. The stock hose has an internal one-way check valve to maintain vacuum in the brake servo, this kit includes a new one-way valve to retain proper brake efficiency from the servo. This kit fits all right hand drive (RHD) MK1 1.8 MX5\/Miata\/Eunos models, it will\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003enot\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efit LHD models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit comes with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to clamp size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\" src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e* Not available for this product *\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata\/Eunos NA (MK1) Chassis '89-'98 | 1.8 BP-4W Engine | Manual \u0026amp; Automatic Transmissions | RHD Models Only\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ SS Worm Drive","offer_id":53818044580169,"sku":"MX5NA-0010-R-CK","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53818044612937,"sku":"MX5NA-0010-B-SC","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53818044645705,"sku":"MX5NA-0010-R-CK","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ Black Spring Clips","offer_id":53818044678473,"sku":"MX5NA-0010-R-SC","price":24.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ SS Worm Drive","offer_id":53818044711241,"sku":"MX5NA-0010-BLK-CK","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Black Spring Clips","offer_id":53818044744009,"sku":"MX5NA-0010-BLK-SC","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk1-na-18-silicone-brake-booster-servo-hose-valvesilicone-hose-kitrace-rally-suppliesmx5na-0010-r-ck-2319330.jpg?v=1773298343"},{"product_id":"mazda-mx5-mk1-na-1-6-silicone-radiator-coolant-breather-hose-kit","title":"Mazda Mx5 MK1 NA 1.6 Silicone Radiator Coolant \u0026 Breather Hose Kit","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality reinforced silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e15 coolant and breather hoses\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the engine bay listed below. The hoses fit all Mx5 MK1 1.6 models.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUpper Radiator Inlet Hose\u003c\/li\u003e\n\u003cli\u003eLower Radiator Outlet to Hard Pipe Hose\u003c\/li\u003e\n\u003cli\u003eLower Radiator Hard Pipe to Block Hose\u003c\/li\u003e\n\u003cli\u003eHeater Matrix Inlet Hose\u003c\/li\u003e\n\u003cli\u003eHeater Matrix Outlet Hose\u003c\/li\u003e\n\u003cli\u003eInlet Manifold to Thermostat Housing Coolant Hose\u003c\/li\u003e\n\u003cli\u003eISC to Throttle Body Coolant Hose\u003c\/li\u003e\n\u003cli\u003eThrottle Body Coolant Hose\u003c\/li\u003e\n\u003cli\u003eThermostat Housing Bypass Hose\u003c\/li\u003e\n\u003cli\u003eRadiator to Expansion Tank Hose\u003c\/li\u003e\n\u003cli\u003eExpansion Tank Overflow Hose\u003c\/li\u003e\n\u003cli\u003eCam Cover to Intake Pipe Breather Hose *\u003c\/li\u003e\n\u003cli\u003ePCV to Inlet Manifold Hose\u003c\/li\u003e\n\u003cli\u003eIACV Breather Hose\u003c\/li\u003e\n\u003cli\u003eIntake Pipe Resonator Hose\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e* The kit includes the one piece cam cover to intake breather hose found on later models. If you have the earlier model with two hoses and a metal breather pipe running across the front of the engine you can either unbolt the metal pipe and use the longer hose, or cut a section out of the middle of the hose to give you the two shorter hoses and keep the metal pipe. The hose can be cut easily with a stanley knife using a new blade, ensuring you leave enough overlap to clamp the hoses to the metal breather pipe. The optional clamp kit includes two additional clamps for this purpose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is available with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\" alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most heavy duty clamps we supply, and are also 100% stainless steel to prevent rust. However they are much more expensive and, like the Worm-Drive clamps provide a slightly less evenly distributed clamping force than the Spring clamps. For this reason we recommend using them for Turbo applications (intercooler\/intake hoses) where high boost can cause hose blow-off's and the additional clamping force is useful. Some customers like to use T-Bolt clamps for all hoses on their vehicle however so we offer them as an option for most of our kits.\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata\/Eunos NA (MK1) Chassis '89-'98 | 1.6 B6-ZE Engine | Manual \u0026amp; Automatic Transmissions | RHD \u0026amp; LHD Models\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ None","offer_id":53818045759817,"sku":"MX5NA-0013-B","price":83.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ SS Worm Drive","offer_id":53818045530441,"sku":"MX5NA-0013-B-CK","price":96.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53818045563209,"sku":"MX5NA-0013-B-SC","price":98.99,"currency_code":"GBP","in_stock":false},{"title":"Blue \/ T-Bolt","offer_id":53818045792585,"sku":"MX5NA-0013-B-TC","price":119.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ None","offer_id":53818045825353,"sku":"MX5NA-0013-R","price":83.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53818045595977,"sku":"MX5NA-0013-R-CK","price":96.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Black Spring Clips","offer_id":53818045628745,"sku":"MX5NA-0013-R-SC","price":98.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ T-Bolt","offer_id":53818045858121,"sku":"MX5NA-0013-R-TC","price":119.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ None","offer_id":53818045890889,"sku":"MX5NA-0013-BLK","price":83.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ SS Worm Drive","offer_id":53818045661513,"sku":"MX5NA-0013-BLK-CK","price":96.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Black Spring Clips","offer_id":53818045694281,"sku":"MX5NA-0013-BLK-SC","price":98.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ T-Bolt","offer_id":53818045923657,"sku":"MX5NA-0013-BLK-TC","price":119.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk1-na-16-silicone-radiator-coolant-breather-hose-kitsilicone-hose-kitrace-rally-suppliesmx5na-0013-b-6714497.jpg?v=1773298344"},{"product_id":"mazda-mx5-mk1-na-1-8-silicone-radiator-coolant-breather-hose-kit","title":"Mazda Mx5 MK1 NA 1.8 Silicone Radiator Coolant \u0026 Breather Hose Kit","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality reinforced silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e14 coolant and breather hoses\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the engine bay listed below. The hoses fit all Mx5 MK1 1.8 models.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUpper Radiator Inlet Hose\u003c\/li\u003e\n\u003cli\u003eLower Radiator Outlet to Hard Pipe Hose\u003c\/li\u003e\n\u003cli\u003eLower Radiator Hard Pipe to Block Hose\u003c\/li\u003e\n\u003cli\u003eHeater Matrix Inlet Hose\u003c\/li\u003e\n\u003cli\u003eHeater Matrix Outlet Hose\u003c\/li\u003e\n\u003cli\u003eThermostat Bypass Hose\u003c\/li\u003e\n\u003cli\u003eThermostat Housing to Throttle Body Hose\u003c\/li\u003e\n\u003cli\u003eRadiator to Expansion Tank Hose\u003c\/li\u003e\n\u003cli\u003eExpansion Tank Overflow Hose\u003c\/li\u003e\n\u003cli\u003eCam Cover to Intake Breather Hose*\u003c\/li\u003e\n\u003cli\u003ePCV to Inlet Manifold Breather Hose\u003c\/li\u003e\n\u003cli\u003eIACV Breather Hose\u003c\/li\u003e\n\u003cli\u003eOil Cooler Coolant Hose\u003c\/li\u003e\n\u003cli\u003eOil Cooler Coolant Return Hose\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e* The kit includes the one piece cam cover to intake breather hose found on later models. If you have the earlier model with two hoses and a metal breather pipe running across the front of the engine you can either unbolt the metal pipe and use the longer hose, or cut a section out of the middle of the hose to give you the two shorter hoses and keep the metal pipe. The hose can be cut easily with a stanley knife using a new blade, ensuring you leave enough overlap to clamp the hoses to the metal breather pipe. The optional clamp kit includes two additional clamps for this purpose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is available with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\" src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most heavy duty clamps we supply, and are also 100% stainless steel to prevent rust. However they are much more expensive and, like the Worm-Drive clamps provide a slightly less evenly distributed clamping force than the Spring clamps. For this reason we recommend using them for Turbo applications (intercooler\/intake hoses) where high boost can cause hose blow-off's and the additional clamping force is useful. Some customers like to use T-Bolt clamps for all hoses on their vehicle however so we offer them as an option for most of our kits.\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata\/Eunos NA (MK1) Chassis '94-'98 | 1.8 BP-ZE Engine | Manual \u0026amp; Automatic Transmissions | RHD \u0026amp; LHD Models\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ None","offer_id":53818053034313,"sku":"MX5NA-0014-B","price":83.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ SS Worm Drive","offer_id":53818053067081,"sku":"MX5NA-0014-B-CK","price":95.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53818053099849,"sku":"MX5NA-0014-B-SC","price":96.99,"currency_code":"GBP","in_stock":false},{"title":"Blue \/ T-Bolt","offer_id":53818053132617,"sku":"MX5NA-0014-B-TC","price":117.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ None","offer_id":53818053165385,"sku":"MX5NA-0014-R","price":83.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53818053198153,"sku":"MX5NA-0014-R-CK","price":95.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Black Spring Clips","offer_id":53818053230921,"sku":"MX5NA-0014-R-SC","price":96.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ T-Bolt","offer_id":53818053263689,"sku":"MX5NA-0014-R-TC","price":117.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ None","offer_id":53818053296457,"sku":"MX5NA-0014-BLK","price":83.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ SS Worm Drive","offer_id":53818053329225,"sku":"MX5NA-0014-BLK-CK","price":95.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Black Spring Clips","offer_id":53818053361993,"sku":"MX5NA-0014-BLK-SC","price":96.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ T-Bolt","offer_id":53818053394761,"sku":"MX5NA-0014-BLK-TC","price":117.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk1-na-18-silicone-radiator-coolant-breather-hose-kitsilicone-hose-kitrace-rally-suppliesmx5na-0014-b-9247324.jpg?v=1773298344"},{"product_id":"mazda-mx5-mk2-1-6-1-8-silicone-radiator-hose-kit","title":"Mazda Mx5 MK2 1.6\/1.8 Silicone Radiator Hose Kit","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality reinforced silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ethe upper and lower radiator hoses\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the engine bay listed below. The hoses fit all Mx5 MK2 models, both 1.6 and 1.8.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUpper Radiator Inlet Hose\u003c\/li\u003e\n\u003cli\u003eLower Radiator Outlet Hose\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is available with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\" src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most heavy duty clamps we supply, and are also 100% stainless steel to prevent rust. However they are much more expensive and, like the Worm-Drive clamps provide a slightly less evenly distributed clamping force than the Spring clamps. For this reason we recommend using them for Turbo applications (intercooler\/intake hoses) where high boost can cause hose blow-off's and the additional clamping force is useful. Some customers like to use T-Bolt clamps for all hoses on their vehicle however so we offer them as an option for most of our kits.\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata NB (MK2\/MK2.5) Chassis '98-'05 | 1.6 B6-ZE \u0026amp; 1.8 BP-Z3 Engines | Manual \u0026amp; Automatic Transmissions | RHD \u0026amp; LHD Models\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ None","offer_id":53818054148425,"sku":"MX5NB-0004-B","price":48.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ SS Worm Drive","offer_id":53818054181193,"sku":"MX5NB-0004-B-CK","price":51.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53818054213961,"sku":"MX5NB-0004-B-SC","price":53.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ T-Bolt","offer_id":53818054246729,"sku":"MX5NB-0004-B-TC","price":55.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ None","offer_id":53818054279497,"sku":"MX5NB-0004-R","price":48.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53818054312265,"sku":"MX5NB-0004-R-CK","price":51.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Black Spring Clips","offer_id":53818054345033,"sku":"MX5NB-0004-R-SC","price":53.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ T-Bolt","offer_id":53818054377801,"sku":"MX5NB-0004-R-TC","price":55.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ None","offer_id":53818054410569,"sku":"MX5NB-0004-BLK","price":48.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ SS Worm Drive","offer_id":53818054443337,"sku":"MX5NB-0004-BLK-CK","price":51.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Black Spring Clips","offer_id":53818054476105,"sku":"MX5NB-0004-BLK-SC","price":53.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ T-Bolt","offer_id":53818054508873,"sku":"MX5NB-0004-BLK-TC","price":55.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk2-1618-silicone-radiator-hose-kitsilicone-hose-kitrace-rally-suppliesmx5nb-0004-b-4941672.jpg?v=1773298343"},{"product_id":"mazda-mx5-mk2-nb-1-6-silicone-brake-booster-servo-hose-valve","title":"Mazda Mx5 MK2 NB 1.6 Silicone Brake Booster Servo Hose \u0026 Valve","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ethe brake servo to inlet manifold vacuum hose\u003c\/strong\u003e. The stock hose has an internal one-way check valve to maintain vacuum in the brake servo, this kit includes a new one-way valve to retain proper brake efficiency from the servo. This kit fits all right hand drive (RHD) MK2 1.6 MX5\/Miata models, it will\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003enot\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efit LHD models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit comes with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to clamp size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\" src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e* Not available for this product *\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata NB (MK2) Chassis '98-'05 | 1.6 B6-ZE Engine | Manual \u0026amp; Automatic Transmissions | RHD Models Only\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ SS Worm Drive","offer_id":53818062111049,"sku":"MX5NB-0009B-VC","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53818062143817,"sku":"MX5NB-0009B-VSC","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53818062242121,"sku":"MX5NB-0009R-VC","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Black Spring Clips","offer_id":53818062274889,"sku":"MX5NB-0009R-VSC","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ SS Worm Drive","offer_id":53818062373193,"sku":"MX5NB-0009BLK-VC","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Black Spring Clips","offer_id":53818062405961,"sku":"MX5NB-0009BLK-VSC","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk2-nb-16-silicone-brake-booster-servo-hose-valvesilicone-hose-kitrace-rally-suppliesmx5nb-0009b-vc-1757960.jpg?v=1773298340"},{"product_id":"mazda-mx5-mk2-5-facelift-1-8-silicone-brake-booster-servo-hose-valve","title":"Mazda Mx5 MK2.5 (Facelift) 1.8 Silicone Brake Booster Servo Hose \u0026 Valve","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ethe brake servo to inlet manifold vacuum hose\u003c\/strong\u003e. The stock hose has an internal one-way check valve to maintain vacuum in the brake servo, this kit includes a new one-way valve to retain proper brake efficiency from the servo. This kit fits all right hand drive (RHD) MK2.5 (Facelift) 1.8 MX5\/Miata models, it will\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003enot\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efit LHD or MK2 (Pre-Facelift) models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit comes with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to clamp size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\" alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e* Not available for this product *\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata NB MK2.5 (Facelift) Chassis '01-'05 | 1.8 BP-Z3 Engine | Manual \u0026amp; Automatic Transmissions | RHD Models Only\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ SS Worm Drive","offer_id":53818062602569,"sku":"MX5NB-0010-B-CK","price":26.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53818062635337,"sku":"MX5NB-0010-B-SC","price":26.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53818062668105,"sku":"MX5NB-0010-R-CK","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ Black Spring Clips","offer_id":53818062700873,"sku":"MX5NB-0010-R-SC","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ SS Worm Drive","offer_id":53818062733641,"sku":"MX5NB-0010-BLK-CK","price":26.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ Black Spring Clips","offer_id":53818062766409,"sku":"MX5NB-0010-BLK-SC","price":26.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk25-facelift-18-silicone-brake-booster-servo-hose-valvesilicone-hose-kitrace-rally-suppliesmx5nb-0010-b-ck-2562438.jpg?v=1773298339"},{"product_id":"mazda-mx5-mk2-pre-facelift-1-8-silicone-brake-booster-servo-hose-valve","title":"Mazda Mx5 MK2 (Pre-Facelift) 1.8 Silicone Brake Booster Servo Hose \u0026 Valve","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ethe brake servo to inlet manifold vacuum hose\u003c\/strong\u003e. The stock hose has an internal one-way check valve to maintain vacuum in the brake servo, this kit includes a new one-way valve to retain proper brake efficiency from the servo. This kit fits all right hand drive (RHD) MK2 (Pre-Facelift) 1.8 MX5\/Miata models, it will\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003enot\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efit LHD or MK2.5 (Facelift) models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit comes with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to clamp size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\" src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e* Not available for this product *\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata NB MK2 (Pre-Facelift) Chassis '98-'01 | 1.8 BP-Z3 Engine | Manual \u0026amp; Automatic Transmissions | RHD Models Only\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ SS Worm Drive","offer_id":53818063356233,"sku":"MX5NB-0011-B-VC","price":25.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53818063389001,"sku":"MX5NB-0011-B-VSC","price":25.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53818063421769,"sku":"MX5NB-0011-R-VC","price":25.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Black Spring Clips","offer_id":53818063454537,"sku":"MX5NB-0011-R-VSC","price":25.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ SS Worm Drive","offer_id":53818063487305,"sku":"MX5NB-0011-BLK-VC","price":25.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Black Spring Clips","offer_id":53818063520073,"sku":"MX5NB-0011-BLK-VSC","price":25.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk2-pre-facelift-18-silicone-brake-booster-servo-hose-valvesilicone-hose-kitrace-rally-suppliesmx5nb-0011-b-vc-4179342.jpg?v=1773298339"},{"product_id":"mazda-mx5-mk2-1-6-silicone-radiator-coolant-breather-hose-kit","title":"Mazda Mx5 MK2 1.6 Silicone Radiator Coolant \u0026 Breather Hose Kit","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality reinforced silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e10 coolant and breather hoses\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the engine bay listed below. The hoses fit all manual Mx5 MK2 1.6 models.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUpper Radiator Inlet Hose\u003c\/li\u003e\n\u003cli\u003eLower Radiator Outlet Hose\u003c\/li\u003e\n\u003cli\u003eHeater Matrix Inlet Hose\u003c\/li\u003e\n\u003cli\u003eHeater Matrix Outlet Hose\u003c\/li\u003e\n\u003cli\u003eThermostat Bypass Coolant Hose\u003c\/li\u003e\n\u003cli\u003eThrottle Body to Inlet Manifold Coolant Hose\u003c\/li\u003e\n\u003cli\u003eThermostat Housing to Throttle Body Coolant Hose\u003c\/li\u003e\n\u003cli\u003eRadiator to Expansion Tank Hose\u003c\/li\u003e\n\u003cli\u003ePCV Valve to Inlet Manifold Breather\u003c\/li\u003e\n\u003cli\u003eCam Cover to Air Intake Breather\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is available with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\" alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most heavy duty clamps we supply, and are also 100% stainless steel to prevent rust. However they are much more expensive and, like the Worm-Drive clamps provide a slightly less evenly distributed clamping force than the Spring clamps. For this reason we recommend using them for Turbo applications (intercooler\/intake hoses) where high boost can cause hose blow-off's and the additional clamping force is useful. Some customers like to use T-Bolt clamps for all hoses on their vehicle however so we offer them as an option for most of our kits.\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata NB (MK2) Chassis '98-'05 | 1.6 B6-ZE Engine | Manual \u0026amp; Automatic Transmissions | RHD \u0026amp; LHD Models\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ None","offer_id":53818070139209,"sku":"MX5NB-0013-B","price":88.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ SS Worm Drive","offer_id":53818068599113,"sku":"MX5NB-0013-B-CK","price":97.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53818068631881,"sku":"MX5NB-0013-B-SC","price":98.99,"currency_code":"GBP","in_stock":false},{"title":"Blue \/ T-Bolt","offer_id":53818070171977,"sku":"MX5NB-0013-B-TC","price":114.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ None","offer_id":53818070204745,"sku":"MX5NB-0013-R","price":88.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53818068664649,"sku":"MX5NB-0013-R-CK","price":97.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Black Spring Clips","offer_id":53818068697417,"sku":"MX5NB-0013-R-SC","price":98.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ T-Bolt","offer_id":53818070237513,"sku":"MX5NB-0013-R-TC","price":114.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ None","offer_id":53818070270281,"sku":"MX5NB-0013-BLK","price":88.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ SS Worm Drive","offer_id":53818068730185,"sku":"MX5NB-0013-BLK-CK","price":97.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Black Spring Clips","offer_id":53818068762953,"sku":"MX5NB-0013-BLK-SC","price":98.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ T-Bolt","offer_id":53818070303049,"sku":"MX5NB-0013-BLK-TC","price":114.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk2-16-silicone-radiator-coolant-breather-hose-kitsilicone-hose-kitrace-rally-suppliesmx5nb-0013-b-3100158.jpg?v=1773298344"},{"product_id":"mazda-mx5-mk2-mk2-5-nb-1-8-silicone-radiator-coolant-breather-hose-kit","title":"Mazda Mx5 MK2\/MK2.5 NB 1.8 Silicone Radiator Coolant \u0026 Breather Hose Kit","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality reinforced silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e11 coolant and breather hoses\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the engine bay listed below. The kit contains 13 hoses but there are two versions of the thermostat bypass hose and cam cover breather hose included, one for MK2 models and one for MK2.5 models.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUpper Radiator Inlet Hose\u003c\/li\u003e\n\u003cli\u003eLower Radiator Outlet Hose\u003c\/li\u003e\n\u003cli\u003eHeater Matrix Inlet Hose\u003c\/li\u003e\n\u003cli\u003eHeater Matrix Outlet Hose\u003c\/li\u003e\n\u003cli\u003eThermostat Bypass Coolant Hose (MK2 only - use below for MK2.5)\u003c\/li\u003e\n\u003cli\u003eThermostat Bypass Coolant Hose (MK2.5 only - use above for MK2)\u003c\/li\u003e\n\u003cli\u003eThermostat Housing to Throttle Body Coolant Hose\u003c\/li\u003e\n\u003cli\u003eCam Cover to Air Intake Breather\u003c\/li\u003e\n\u003cli\u003ePCV Valve to Inlet Manifold Breather (MK2 only - use below for MK2.5)\u003c\/li\u003e\n\u003cli\u003ePCV Valve to Inlet Manifold Breather (MK2.5 only - use above for MK2)\u003c\/li\u003e\n\u003cli\u003eOil cooler inlet hose\u003c\/li\u003e\n\u003cli\u003eOil cooler outlet hose\u003c\/li\u003e\n\u003cli\u003eRadiator to Expansion Tank Hose\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is available with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\" alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most heavy duty clamps we supply, and are also 100% stainless steel to prevent rust. However they are much more expensive and, like the Worm-Drive clamps provide a slightly less evenly distributed clamping force than the Spring clamps. For this reason we recommend using them for Turbo applications (intercooler\/intake hoses) where high boost can cause hose blow-off's and the additional clamping force is useful. Some customers like to use T-Bolt clamps for all hoses on their vehicle however so we offer them as an option for most of our kits.\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda Mx5\/Miata NB (MK2\/MK2.5) Chassis '98-'05 | 1.8 BP-Z3 Engine | Manual \u0026amp; Automatic Transmissions | RHD \u0026amp; LHD Models\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ None","offer_id":53818072072521,"sku":"MX5NB-0014-B","price":94.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ SS Worm Drive","offer_id":53818072105289,"sku":"MX5NB-0014-B-CK","price":104.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53818072138057,"sku":"MX5NB-0014-B-SC","price":104.99,"currency_code":"GBP","in_stock":false},{"title":"Blue \/ T-Bolt","offer_id":53818072170825,"sku":"MX5NB-0014-B-TC","price":119.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ None","offer_id":53818072203593,"sku":"MX5NB-0014-R","price":94.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53818072236361,"sku":"MX5NB-0014-R-CK","price":104.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Black Spring Clips","offer_id":53818072269129,"sku":"MX5NB-0014-R-SC","price":104.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ T-Bolt","offer_id":53818072301897,"sku":"MX5NB-0014-R-TC","price":119.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ None","offer_id":53818072334665,"sku":"MX5NB-0014-BLK","price":94.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ SS Worm Drive","offer_id":53818072367433,"sku":"MX5NB-0014-BLK-CK","price":104.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Black Spring Clips","offer_id":53818072400201,"sku":"MX5NB-0014-BLK-SC","price":104.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ T-Bolt","offer_id":53818072432969,"sku":"MX5NB-0014-BLK-TC","price":119.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-mx5-mk2mk25-nb-18-silicone-radiator-coolant-breather-hose-kitsilicone-hose-kitrace-rally-suppliesmx5nb-0014-b-3961272.jpg?v=1773298343"},{"product_id":"mazda-rx8-231-silicone-radiator-coolant-breather-hose-kit","title":"Mazda Rx8 231 Silicone Radiator Coolant \u0026 Breather Hose Kit","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSome types of coolant are not compatible with silicone hose\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis high quality reinforced silicone hose kit replaces\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e18 coolant and breather hoses\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the engine bay including the main radiator hoses and heater hoses. The hoses fit manual pre-facelift RX8 231 models that are right hand drive. One brake servo hose does not fit LHD vehicles, but we can supply an extra LHD hose at additional cost using the options above so that the kit will fit LHD models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose Clamps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit is available with a full set of hose clamps using the options above. The three types of clamp we offer are shown below, but not all options will appear for some kits due to size limitations:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Stoney Racing Stainless Steel Worm-Drive Clamps, Black Coated Spring Clamps and Stainless Steel T-Bolt Clamps\" src=\"https:\/\/www.stoneyracing.com\/ebay\/clamp-types.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most commonly used type by vehicle manufacturers. They provide excellent evenly distributed clamping force and are generally the best option for clamping coolant hoses, but they can be fiddly to fit\/remove, and being mild steel they are more prone to surface rust over time. Whilst this won't affect the performance or lifespan of the clamp some customers prefer our stainless steel options below which tend to look better and still perform as they should.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorm-Drive clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehave slightly less evenly distributed clamping force as the Spring type clamps, but they are still a good quality clamp and usually easier to fit\/remove in the tight confines of an engine bay. Being 100% stainless steel they do not rust, so we recommend this type of clamp if you are concerned about the appearance of your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-Bolt clamps\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the most heavy duty clamps we supply, and are also 100% stainless steel to prevent rust. However they are much more expensive and, like the Worm-Drive clamps provide a slightly less evenly distributed clamping force than the Spring clamps. For this reason we recommend using them for Turbo applications (intercooler\/intake hoses) where high boost can cause hose blow-off's and the additional clamping force is useful. Some customers like to use T-Bolt clamps for all hoses on their vehicle however so we offer them as an option for most of our kits.\u003c\/p\u003e\n\u003cp\u003eFor some vehicles the original clamps can be reused so we also offer our kits without clamps, but please be aware our silicone hoses are slightly thicker than the standard hoses so in some cases the original clamps may be too small.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Mazda RX8 SE3P Chassis '03-'08 | 231 13B-MSP (Renesis) Engine | Manual Transmissions | RHD \u0026amp; LHD Variants Available\u003c\/li\u003e\n\u003cli\u003eConstruction: ~4.5mm 4-ply silicone with 3-ply polyester reinforcing\u003c\/li\u003e\n\u003cli\u003eMax Operating Pressure: \u0026gt;7bar\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: \u0026gt;10bar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature range: -50°c to 180°c\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 Years (UK based)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stoney Racing","offers":[{"title":"Blue \/ None","offer_id":53818072596809,"sku":"SE3P-0004-B","price":154.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ SS Worm Drive","offer_id":53818072629577,"sku":"SE3P-0004-B-CK","price":168.99,"currency_code":"GBP","in_stock":true},{"title":"Blue \/ Black Spring Clips","offer_id":53818072662345,"sku":"SE3P-0004-B-SC","price":170.99,"currency_code":"GBP","in_stock":false},{"title":"Blue \/ T-Bolt","offer_id":53818072695113,"sku":"SE3P-0004-B-TC","price":198.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ None","offer_id":53818072727881,"sku":"SE3P-0004-R","price":154.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ SS Worm Drive","offer_id":53818072760649,"sku":"SE3P-0004-R-CK","price":168.99,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Black Spring Clips","offer_id":53818072793417,"sku":"SE3P-0004-R-SC","price":170.99,"currency_code":"GBP","in_stock":false},{"title":"Red \/ T-Bolt","offer_id":53818072826185,"sku":"SE3P-0004-R-TC","price":198.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ None","offer_id":53818072858953,"sku":"SE3P-0004-BLK","price":154.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ SS Worm Drive","offer_id":53818072891721,"sku":"SE3P-0004-BLK-CK","price":168.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Black Spring Clips","offer_id":53818072924489,"sku":"SE3P-0004-BLK-SC","price":170.99,"currency_code":"GBP","in_stock":false},{"title":"Black \/ T-Bolt","offer_id":53818072957257,"sku":"SE3P-0004-BLK-TC","price":198.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/mazda-rx8-231-silicone-radiator-coolant-breather-hose-kitsilicone-hose-kitrace-rally-suppliesse3p-0004-b-6692530.jpg?v=1773298340"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/collections\/mazda-silicone-hose-kits-1959152.png?v=1773296292","url":"https:\/\/rrs-store.co.uk\/collections\/mazda-silicone-hose-kits.oembed","provider":"Race Rally Supplies","version":"1.0","type":"link"}