{"product_id":"mmx-bmw-wheel-stud-nut-kit-set-of-20-studs-for-mmx-kit-only","title":"BMW Wheel Stud \u0026 Nut Kit (Set Of 20 Studs For MMX Kit Only)","description":"\u003cp\u003eIf you already have the MMX Performance Stud \u0026amp; Nut Kit, MMX also supply wheel studs and wheel nuts as replacements. These are ideal if you are adding spacers and want to change stud length, or if you are changing wheels that require either \u003cspan data-mce-fragment=\"1\"\u003econical or ball seat lug nuts to be used.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese are all supplied as set of 20 pieces. Please note that these are\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eonly\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ecompatible with the MMX Stud and Nut Kit, not for any other applications. They apply for all cars with M14x1.25 nuts - from BMW F\u0026amp;G-Series and Mini F56 onwards.\u003c\/p\u003e\n\u003cp\u003e(Wheel Nuts are also available)\u003c\/p\u003e\n\u003ch2\u003ePRODUCT SPECIFICATION\u003c\/h2\u003e\n\u003cp\u003eTwo different stud lengths are available, depending on your fitment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e70mm Stud:  No spacers, or up to 10mm spacer\u003c\/li\u003e\n\u003cli\u003e80mm Stud:  Spacers between 10mm to 20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSHORTER 70mm STUDS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eLONGER 80mm STUDS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThread length (Hub side): 13mm\u003c\/p\u003e\n\u003cp\u003eThread length (Nut Side): 50mm\u003c\/p\u003e\n\u003cp\u003eOverall stud length: 70mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eThread length (Hub side): 13mm\u003c\/p\u003e\n\u003cp\u003eThread length (Nut Side): 60 mm\u003c\/p\u003e\n\u003cp\u003eOverall stud length: 80mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFITTING INFORMATION\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRemove the wheels and clean the threads in the hub and the short ends of the new studs using a suitable solvent such as brake cleaner. Ensure the threads are totally free from dirt and grease.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBefore you fit the stud, check that the shank (the plain section between inner and outer threads) passes easily through the disc holes and you are not bottoming the stud on the brake disc.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoat the threads on the short end of the stud with a thin covering of Loctite Blue 2422 (high temp rated to 650°F - it’s important to use a high temperature-rated Loctite that exceeds hub temps).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUsing a 6mm Allen Key, screw the short end of the stud into the hub until you reach the shank.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDO NOT OVERTIGHTEN THE STUD INTO THE HUB – TIGHTEN UP TO AROUND 30ft-lbs \/ 40Nm.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWait about three hours for the Loctite to go off fully and refit the wheels with the new nuts using 19mm socket. Lower the vehicle back onto the floor and torque the wheel nuts to the factory specification of the original lug bolts.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRecheck the torque of the studs after 30 minutes of driving once the whole assembly has got hot.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"R44 Performance","offers":[{"title":"70mm single stud M14 x 1.25","offer_id":53695412142409,"sku":"MMR37-1502-70","price":139.99,"currency_code":"GBP","in_stock":true},{"title":"80mm single stud M14 x 1.25","offer_id":53695412175177,"sku":"MMR37-1502-80","price":139.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/bmw-wheel-stud-nut-kit-set-of-20-studs-for-mmx-kit-onlywheel-studsrace-rally-suppliesmmr37-1502-70-6087001.jpg?v=1773300077","url":"https:\/\/rrs-store.co.uk\/products\/mmx-bmw-wheel-stud-nut-kit-set-of-20-studs-for-mmx-kit-only","provider":"Race Rally Supplies","version":"1.0","type":"link"}