{"product_id":"peugeot-205-phase-1-2-3-door-hatchback","title":"Bolt-In FIA Homologated Roll Cage – Peugeot 205 GTI","description":"\u003ch1\u003e\u003cspan\u003eOMP AB0-105P-126 FIA Bolt-In Roll Cage – Peugeot 205 GTI\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eOMP AB0-105P-126\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e is a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e10-point bolt-in racing roll cage\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e designed specifically for the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ePeugeot 205 GTI 3-door, 1983–1998\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eManufactured from \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFE45 cold-drawn steel tubing\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, the cage uses a combination of 50mm and 40mm diameter tubing and incorporates an \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eA2SX configuration\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e with single door reinforcements, sleeve connecting tubes and diagonal reinforcement on the rear legs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe bolt-in design allows the cage to be assembled within the vehicle without requiring the entire structure to be welded into place. However, \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ewelding is still required during installation\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, including the door bars and certain mounting points depending on the vehicle and cage configuration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAs well as providing additional occupant protection in the event of an accident, a properly installed roll cage can increase the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003etorsional rigidity of the bodyshell\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, which can be beneficial on competition vehicles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis cage is \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFIA homologated – All J\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and is intended for competition use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eThis roll cage is built to order. Please allow approximately 4–6 weeks for manufacture before dispatch.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Lead times are approximate and may vary depending on production schedules.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eOMP AB0-105P-126\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e10-point bolt-in racing roll cage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for Peugeot 205 GTI 3-door\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for 1983–1998 models\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eFIA homologated – All J\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eA2SX configuration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFE45 cold-drawn steel construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e50mm × 2mm main hoop tubing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e40mm × 2mm tubing for other cage sections\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSingle door reinforcements\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSleeve connecting tubes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDiagonal reinforcement between the rear legs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSingle door bars supplied\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDoor bars require cutting to length and welding during installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for motorsport competition use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e26kg stated weight\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan\u003eSpecification Details\u003c\/span\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cbr class=\"ProseMirror-trailingBreak\"\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOMP\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProduct Code\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAB0-105P-126\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eVehicle\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePeugeot 205 GTI 3-door\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel Years\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1983–1998\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eType\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBolt-in roll cage\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePoints\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e10\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eConfiguration\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eA2SX\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eMaterial\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFE45 cold-drawn steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eMain Hoop Tubing\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e50mm × 2mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOther Tubing\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e40mm × 2mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eHomologation\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFIA – All J\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e26kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLead Time\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eApprox. 4–6 weeks\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003cspan\u003eConstruction \u0026amp; Installation\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AB0-105P-126 is manufactured from \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFE45 cold-drawn steel tubing\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, providing the strength required for a competition roll cage while keeping the overall cage weight to approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e26kg\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003emain hoop uses 50mm diameter × 2mm wall tubing\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, while the remaining cage sections use \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e40mm diameter × 2mm wall tubing\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe A2SX configuration includes \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003esingle door reinforcements, sleeve connecting tubes and diagonal reinforcement on the rear legs\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlthough this is a bolt-in cage, installation is not simply a case of bolting the complete cage into the vehicle. \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eWelding is required\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e for certain parts of the installation. The supplied single door bars require cutting to the correct length and welding into position, while additional welding may be required for mounting plates and other cage attachment points.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe exact installation requirements can vary depending on the vehicle application, so the relevant OMP fitting instructions should be followed when installing the cage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eImportant Installation Information\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eThis is a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ebolt-in competition roll cage\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, but welding is still required during installation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe supplied single door bars require cutting to length and welding into position.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWelding may be required for chassis strengthening mounting plates and door-bar mounting points.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSome cage applications may require additional welding to other sections of the cage.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDashboard modifications may be required on some vehicle applications to allow the cage to be correctly positioned.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOMP bolt-in competition cages are \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enot suitable for vehicles fitted with a factory sunroof unless specifically stated otherwise\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCheck the specific vehicle application and fitting instructions before installation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlways confirm that the cage is suitable for the regulations governing your intended motorsport application.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eWhat’s in the Box?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 × OMP AB0-105P-126 FIA homologated roll cage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFitting components as supplied by OMP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSingle door bars\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003eWhat vehicle does the OMP AB0-105P-126 fit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AB0-105P-126 is designed for the \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ePeugeot 205 GTI 3-door, 1983–1998\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eIs this roll cage FIA homologated?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eYes. The AB0-105P-126 is \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFIA homologated – All J\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eIs this a bolt-in roll cage?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eYes. The cage is designed as a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ebolt-in installation\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, but welding is still required for certain parts of the installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDoes the cage require welding?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eYes. Although the main cage is designed to bolt into the vehicle, the supplied door bars require cutting to length and welding into position. Additional welding may also be required for mounting plates and other installation points.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhat material is the cage made from?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe cage is manufactured from \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFE45 cold-drawn steel tubing\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhat size tubing does the cage use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe main hoop uses \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e50mm × 2mm tubing\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, while the other cage sections use \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e40mm × 2mm tubing\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eHow many points does the cage have?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe AB0-105P-126 is a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e10-point roll cage\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhat does the A2SX configuration include?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe A2SX configuration includes \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003esingle door reinforcements, sleeve connecting tubes and diagonal reinforcement on the rear legs\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eHow much does the roll cage weigh?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe stated cage weight is \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e26kg\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eIs the cage suitable for a Peugeot 205 with a sunroof?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eOMP bolt-in competition roll cages are generally \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enot suitable for vehicles with a factory-fitted sunroof unless specifically stated otherwise\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Check the application information before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDoes the cage require dashboard modifications?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSome applications may require modifications to the dashboard to allow the cage to be correctly installed. The vehicle-specific fitting information should be checked before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eHow long does this cage take to arrive?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe AB0-105P-126 is \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ebuilt to order\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Please allow approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e4–6 weeks for manufacture before dispatch\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. The lead time is approximate and can vary depending on production schedules.\u003c\/span\u003e\u003c\/p\u003e","brand":"Peugeot","offers":[{"title":"Default Title","offer_id":54147208446281,"sku":"RP-OMP-AB0-105P-126","price":869.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/9463\/0729\/files\/bolt-in-fia-homologated-roll-cage-peugeot-205-gtiroll-cagerace-rally-suppliesrp-omp-ab0-105p-126-9532210.jpg?v=1789410549","url":"https:\/\/rrs-store.co.uk\/products\/peugeot-205-phase-1-2-3-door-hatchback","provider":"Race Rally Supplies","version":"1.0","type":"link"}