Brantz BR-57 CANBUS Interface - Plug & Go (A-B)

The Brantz CANBUS Interface – Plug & Go (A-B) provides a simple way to connect your Brantz tripmeter to modern vehicle electronics via the CANBUS system.

Designed for vehicles typically post-2005, this unit plugs directly into the OBDII port, allowing you to pull both power and speed/distance data without the need for additional sensors or complex installation.

Ideal for recce use, hire cars, or modern road cars, it’s a fast and convenient solution for getting your tripmeter up and running.

Specifications

• Compatible with all Brantz tripmeters and Retrotrips
• Connects via OBDII (CANBUS system)
• Dimensions: 70 x 50 x 25mm
• Cable length: 1.1m

How It Works

Modern vehicles use a CANBUS system to share data between components such as the ECU, ABS, and gearbox.

• The interface plugs into the vehicle’s OBDII port
• It reads speed and distance data directly from the CANBUS network
• This data is then sent straight to your Brantz tripmeter
• Power is also supplied through the same connection

No mechanical sensors or additional wiring required.

Installation

1. Locate the OBDII port in your vehicle (usually under the dashboard)
2. Plug in the CANBUS Interface
3. Connect the output cable to your Brantz tripmeter
4. Secure the unit and cable safely within the cabin

That’s it—plug and go.

Key Benefits

• True plug-and-play installation
• No need for gearbox or wheel sensors
• Draws both power and data from the vehicle
• Ideal for modern vehicles, recce cars, and hire vehicles
• Compact and easy to install

The quickest and easiest way to run a Brantz tripmeter in a modern vehicle—no wiring, no sensors, just plug in and go.