HEL Performance
HEL Titanium AN6 Quick Release Dry Break Coupling – HQR-06-06-TI-BLK
HEL Titanium AN6 Quick Release Dry Break Coupling – HQR-06-06-TI-BLK
Couldn't load pickup availability
HEL Titanium AN6 Quick Release Dry Break Coupling – HQR-06-06-TI-BLK
When it's a race against time the HEL quick release dry break system facilitates the rapid removal and installation of fuel lines, fuel components, oil components, any AN6 hoses whilst eliminating any fluid or pressure loss during pit stops and maintenance at the race track.
The dry break system is protected against corrosive fuels with high alcohol content by a high-quality Titanium construction and EPDM O-ring seals. A smooth, swivel bayonet locking mechanism, combined with high-pressure springs, ensures the clean and secure transfer of fuel, oil, and air - eliminating excess air ingress during the quick connection and disconnection of both couplings.
HEL Performance design and manufacture braided lines, AN hose fittings and oil system parts in the UK for road, track and motorsport use.
Key Features
- Product type: Quick Release Dry Break Couplings
- Manufacturer: HEL Performance, UK
- Part number: HQR-06-06-TI-BLK
What's Included
- 1x HEL AN6 Quick Release Dry Break Coupler
Specification
| Detail | Value |
|---|---|
| Component Type | Quick Release Dry Break Coupler |
| Connection Type | Double Shut Off System |
| Inlet Thread (Male) | AN6, AN06, -6 AN |
| Outlet Thread (Male) | AN6, AN06, -6 AN |
| Flow Diameter (Internal) | 7.55mm / 0.29" / 5/16" |
| Length (Overall - Including Threads) | 82.0mm / 3.22" |
| Width (Widest Point) | 27.5mm / 1.08" |
| Weight | 62g / 0.13lbs |
| Operating Pressure (Maximum) | 1250 PSI / 86.2 BAR |
| Fluid Compatibility | Petrol, Diesel, Race Fuel, Engine Oil, Power Steering Fluid, Water, Pneumatics, Gear Oil (Differential Coolers) |
| Material (O-Ring Seal) | EPDM |
| Material | 6AL4V Titanium |
| Finish | Anodised Black & Silver |
| Brand | HEL |
Frequently Asked Questions
What does the AN size mean?
AN (or dash) sizes describe the hose size in sixteenths of an inch, so -6 AN is 6/16" (3/8") and -8 AN is 8/16" (1/2").
Do AN fittings need thread sealant?
AN fittings seal on a 37° flare, so the flare should not be sealed. Tapered NPT threads do need a suitable thread sealant.
Will this fit my hose and fittings?
Check the thread size, AN size and material in the specification before ordering. Contact us if you need help matching parts.
Important Fitment Information
Please check thread sizes, hose sizes and vehicle fitment before ordering. Prices include VAT. If you are unsure which part you need, contact us and we will help.
Share
