Track-Pro Floor Mounted Angled 3 Pedal System

The Track-Pro. Our First Multi-Fit Pedal System.

Part Number : OBPXY002

____________________________________________________________________

Kit Options Available:

Option 1 = Hydraulic Pedal Box & Bias Bar Only
Option 2 = Hydraulic Pedal Box, Bias Bar + Master Cylinders x3
Option 3 = Hydraulic Pedal Box, Bias Bar, Master Cylinders x3, Reservoirs x3 + Reservoir Bracket
Option 4 = Hydraulic Pedal Box, Bias Bar, Master Cylinders x3, Reservoirs x3, Reservoir Bracket + Bias Adjuster Cable (700mm)

Option 5 = Cable Clutch Pedal Box & Bias Bar Only
Option 6 = Cable Clutch Pedal Box, Bias Bar + Master Cylinders x2
Option 7 = Cable Clutch Pedal Box, Bias Bar, Master Cylinders x2, Reservoirs x2 + Reservoir Bracket
Option 8 = Cable Clutch Pedal Box, Bias Bar, Master Cylinders x32, Reservoirs x2, Reservoir Bracket + Bias Adjuster Cable (700mm)

*** Master Cylinders will be supplied as 0.625″, 0.700″ & 0.750″ Remote Cylinders which is the recommended set up, please contact us for alternative sizes***

*** FOR ABS SET UPS, PLEASE CONTACT US***

___________________________________________________________________

Our lightweight range dual brake master cylinder bias controlled pedal boxes have been designed to offer the driver the highest level of efficiency in this critical area.

The Reinforced Mild Steel Pedals are fabricated with a strengthening plate on the rear to enable a strong arm for your pedal force. The pedals are curved pedal pads for comfort and gripped tape. The clutch pedal also includes a stop on the rear to adjust the throw of the pedal.

The base box frame has been developed out of 2mm Mild Steel to provide an improved robustness and strength which is designed to mount up against the bulkhead to provide further support. On the rear of the frame, it has 3 x mounting points for your brake master cylinders (will fit the majority of master cylinders on the market).

The Accelerator Pedal is equipped with two throttle stops that can be adjusted to suit your pedal throw and also a sensitive return spring. On the rear of the pedal, it has the throttle cable linkage installed as standard although it is also Drive By Wire (DBW) Compatible. Simply remove the linkage and replace with a Linear Potentiometer.

Product Information:

• Fitment: Bulkhead Fit
• Pedal Ratio: 5.1
• Weight: 3.2kg
• Available as Hydraulic or Cable Clutch (Adaptor simply bolts onto the rear of the box where the clutch cylinder would normally go)