Stoney Racing
Stoney Racing Universal Thermal Radiator Fan Switch & Adapter Kit
Stoney Racing Universal Thermal Radiator Fan Switch & Adapter Kit
Pre-order: 32mm, 38mm are made to order. Please allow 3–5 weeks for dispatch.
Couldn't load pickup availability
Stoney Racing SRU-TFSK Universal Thermal Radiator Fan Switch & Adapter Kit
The Stoney Racing SRU-TFSK is a complete kit for thermally controlling an aftermarket electric radiator fan. It contains an M14 thermal switch, an aluminium hose adapter and a pair of stainless clamps.
Choose from 8 adapter sizes for 26mm to 40mm hoses and 6 switch temperatures from 80°C to 105°C.
Key Features
- Thermal switch, hose adapter and clamps in one kit
- Adapters for hose IDs from 26mm to 40mm
- 6 switch-on temperatures from 80°C to 105°C
- Unperforated, rolled-edge stainless clamps, safe on silicone hoses
- Ideal with our 8" to 16" slimline fans
Specifications
| Specification Details | |
|---|---|
| Brand | Stoney Racing |
| Product Code | SRU-TFSK |
| Adapter Sizes | 26, 28, 30, 32, 34, 36, 38 or 40mm OD |
| Switch Thread | M14x1.5 |
| Switch-On Temperatures | 80, 85, 90, 95, 100 or 105°C |
| Switch Max Current | 1 amp (relay control only) |
| Adapter Material | Aluminium |
| Clamps | Pair of stainless steel |
Choosing the Adapter Size
Measure the inside diameter of your top radiator hose and choose the matching adapter. Each adapter also fits hoses 1mm smaller, so a 30mm adapter suits 29–30mm hoses. If the hose is wider at one end, measure the section you will cut.
To fit, cut the hose on a straight section, remove about 30mm, and rejoin the two halves with the adapter and the clamps supplied.
Choosing the Switch Temperature
Pick a switch that turns on about 10–15°C above the temperature your thermostat starts to open. For example, a 74°C thermostat suits the 85°C switch, and an 82°C thermostat suits the 95°C switch. Colder is not always better, as the engine needs to reach its normal operating temperature.
| Switches On (±3°C) | Fahrenheit | Switches Off |
|---|---|---|
| 80°C | 176°F | 5–8°C lower |
| 85°C | 185°F | 5–8°C lower |
| 90°C | 194°F | 5–8°C lower |
| 95°C | 203°F | 5–8°C lower |
| 100°C | 212°F | 8–10°C lower |
| 105°C | 221°F | 8–10°C lower |
Important Fitting Information
- The switch is rated at 1 amp maximum. It must switch the low-current side of a relay (pins 85/86), never the fan directly. Failure from overloading is not covered by the warranty.
- Run the fan from the battery through a relay and inline fuse.
What's in the Box?
- 1 × M14x1.5 thermal fan switch
- 1 × aluminium radiator hose adapter
- 2 × stainless steel hose clamps
Frequently Asked Questions
Can I wire the fan straight through the switch?
No. The switch is only rated at 1 amp, so it must trigger a relay.
Which hose should it go in?
The top radiator hose, on the hot side before the radiator core.
Can I buy the parts separately?
Yes. The switch and hose adapter are also sold on their own.
Share
