Jenvey Ford 2.0 Duratec - THP45 ITB Kit

The Jenvey Ford 2.0 Duratec - THP45 ITB Kit (CKFD07-TH) fuel-injects the Ford 2.0L Duratec using two 45mm TH throttle bodies in a package 80mm shorter than the TB kit. It is ideal for track, road and rally cars with tight engine bays.

Designed and manufactured by Jenvey Dynamics in the UK, Jenvey's individual throttle body systems are prized for crisp throttle response, strong torque and the unmistakable induction sound. An aftermarket ECU is required.

Key Features:

• Built & Balanced: Supplied assembled and balanced by Jenvey, ready to fit.
• Improved Fuel Mixing: Injectors sit further upstream, in the part-throttle turbulence of the butterfly, for better atomisation, torque and power.
• Maximum Flow: Profiled spindles minimise cross-sectional area at full throttle.
• Fine Low-Speed Control: A shallow 8° shut angle gives finer control at small throttle openings.
• Proven Durability: Major components are rig tested to over 1 million cycles.
• UK Made: Cast in Jenvey's own foundry and machined in the same UK factory; castings are lighter than fully CNC-machined parts.
• Modular System: Bespoke throttle sizes and system lengths can be built to order.
• Build It Your Way: Choose your throttle actuation and throttle position sensor above. The price updates as you choose.

Features

• 80mm shorter than the equivalent TB kit, ideal for tight engine bays
• Uses compact 45mm TH throttle bodies
• Supplied with 60mm long air horns

Technical Specifications:

What's In The Box?

• 1 x Inlet manifold
• 2 x 45mm TH throttle bodies
• 1 x Aluminium fuel rail set
• 1 x Set of 60mm long air horns
• Plus any throttle actuation and throttle position sensor options you select above

Complete Your Kit:

These Jenvey parts are sold separately and can be added to your basket from the links below.

• TPS2 loom socket for TP1/TP8/TP11 sensors (£14.40)
• TPS3 DTM loom socket for the Contactless sensor (£21.60)
• 3.0 bar fuel pressure regulator (£110.40, fits the housing below)
• Remote regulator housing with -6 JIC fittings (£74.40)
• Bosch 201 fuel pump, 200 L/hr (£248.40)
• Pico 330cc fuel injector (£123.60 each, one per cylinder)
• Idle control valve (£106.80, for ECU idle control on road cars)
• Synchrometer 39-55mm (£79.20)

FURTHER OPTIONS AVAILABLE ON REQUEST:

(Please contact us to add any of the following)

• Filter kit: 90mm filter with 50mm carbon backplate (+£374.40 inc VAT)

Please note:

• Pico injectors are recommended for this kit; see Jenvey's injector sizing chart.
• An idle air system helps road use but isn't needed with electronic actuation.
• A panel filter requires a 50mm dished carbon backplate (ABF-KIT-MF07).

Frequently Asked Questions (FAQs):

Q: What does this kit fit?
A: Ford Duratec 2.0L engines in Ford road cars, Caterham, Westfield and other kit cars, plus Power Torque Dura-Power engines. Please contact us if you'd like us to confirm fitment for your engine.

Q: Do I need an aftermarket ECU?
A: Yes. Individual throttle bodies need an aftermarket ECU that is mapped to suit the kit.

Q: Which throttle actuation should I choose?
A: Most customers choose a cable linkage: single for one throttle cable, double for a twin-cable setup. The electronic actuator is for drive-by-wire systems with a suitable ECU.

Q: Which throttle position sensor should I choose?
A: The Colvern CP17 is the standard sensor. The Contactless L&R sensor has no wearing parts, so it's ideal for motorsport. Remember to add the matching loom socket.

Q: Are injectors and a fuel pump included?
A: No, unless listed in What's In The Box. Add them from the Complete Your Kit list above.

Q: Do I need an idle control valve?
A: It's recommended for road cars to improve drivability, but it isn't needed with electronic throttle actuation.

Q: Is this kit made to order?
A: Yes. Jenvey builds kits to order, so please allow time for manufacture. Please contact us for current lead times.

Q: Can I get a different bore size or specification?
A: Yes. Jenvey systems are modular and bespoke builds are possible. Please contact us and we'll confirm fitment and price.