Jenvey Ford 2.5 Duratec - Heritage ITB Kit

The Jenvey Ford 2.5 Duratec - Heritage ITB Kit (CKFD16-TD) boosts throttle response and power on Duratec engines while giving a period look under the bonnet. It suits fast road and track engines up to around 300bhp.

Designed and manufactured by Jenvey Dynamics in the UK, Jenvey's individual throttle body systems are prized for crisp throttle response, strong torque and the unmistakable induction sound. An aftermarket ECU is required.

Key Features:

• Built & Balanced: Supplied assembled and balanced by Jenvey, ready to fit.
• Improved Fuel Mixing: Injectors sit further upstream, in the part-throttle turbulence of the butterfly, for better atomisation, torque and power.
• Maximum Flow: Profiled spindles minimise cross-sectional area at full throttle.
• Fine Low-Speed Control: A shallow 8° shut angle gives finer control at small throttle openings.
• Proven Durability: Major components are rig tested to over 1 million cycles.
• UK Made: Cast in Jenvey's own foundry and machined in the same UK factory; castings are lighter than fully CNC-machined parts.
• Modular System: Bespoke throttle sizes and system lengths can be built to order.
• Build It Your Way: Choose your throttle actuation above. The price updates as you choose.

Features

• Cast DCOE manifold with a 12.5° curve
• Manifold can be ported up to 52mm for engines over 300bhp
• Throttle position sensor included

Technical Specifications:

What's In The Box?

• 2 x 48mm Heritage throttle bodies
• 40mm long spun aluminium air horns
• 1 x Built-in fuel rail
• 350cc fuel injectors
• 1 x Throttle position sensor
• 1 x Cast DCOE manifold with 12.5° curve
• Plus any throttle actuation options you select above

Complete Your Kit:

These Jenvey parts are sold separately and can be added to your basket from the links below.

• TPS2 loom socket for TP1/TP8/TP11 sensors (£14.40)
• 3.0 bar fuel pressure regulator (£110.40, fits the housing below)
• Remote regulator housing with -6 JIC fittings (£74.40)

FURTHER OPTIONS AVAILABLE ON REQUEST:

(Please contact us to add any of the following)

• Mesh Air Filter for Heritage Throttle Body Air Horns (each) (+£34.80 inc VAT)
• Ti Automotive Fuel Pump (+£159.60 inc VAT)

Please note:

• Mesh air filters clip onto the top of the Heritage air horns and are recommended.
• The kit is supplied with 350cc injectors; 250cc or 730cc alternatives are available, see Jenvey's injector sizing chart.
• An idle air system improves road car drivability but isn't required with electronic actuation.

Frequently Asked Questions (FAQs):

Q: What does this kit fit?
A: Ford 2.5L Duratec engines (as fitted to the Ford Mondeo and common in kit and track cars) and Power Torque Dura-Power engines. Please contact us if you'd like us to confirm fitment for your engine.

Q: Do I need an aftermarket ECU?
A: Yes. Individual throttle bodies need an aftermarket ECU that is mapped to suit the kit.

Q: Which throttle actuation should I choose?
A: Most customers choose a cable linkage: single for one throttle cable, double for a twin-cable setup. The electronic actuator is for drive-by-wire systems with a suitable ECU.

Q: Are injectors and a fuel pump included?
A: No, unless listed in What's In The Box. Add them from the Complete Your Kit list above.

Q: Do I need an idle control valve?
A: It's recommended for road cars to improve drivability, but it isn't needed with electronic throttle actuation.

Q: Is this kit made to order?
A: Yes. Jenvey builds kits to order, so please allow time for manufacture. Please contact us for current lead times.

Q: Can I get a different bore size or specification?
A: Yes. Jenvey systems are modular and bespoke builds are possible. Please contact us and we'll confirm fitment and price.