Share
Rally Lighting Guide: Light Pods, LED Bars, Spot Lamps and Rain Lights
On a night stage your lights are as important as your engine. Here is how to put together a setup that lets you see far enough, wide enough and for long enough.
By Race Rally Supplies · 6 minute read
Good lighting is about two jobs: a long, narrow beam to see down the straights, and a wide spread to light the corners and verges. Most rally setups combine both, with a light pod or bar on the bonnet and the car's own headlights uprated with better bulbs.
Build your setup
A bonnet-mounted pod holding several lamps, quick to fit and remove between stages.
Shop light pods →Huge spread of light from a slim bar. PIAA V-RF20 · £343.99 →
Period-style round lamps for historic cars. ASP 181mm · £79.99 →
Whiter, brighter road-legal bulbs for your main headlights.
PIAA H3 · £67.49 →Don't forget
A cage-mounted LED lets the co-driver read notes without dazzling the driver. Map lights
Most circuit championships require an approved rear rain light. Rain lights
For service halts and roadside fixes. Work lamps
Extra lamps draw a lot of current. Use a relay and fused wiring, and make sure your alternator and battery can keep up on a long night stage.
Common questions
LED or HID?
LED is tougher, lighter on power and instant-on. HID gives a very long, intense beam. Many crews mix the two in one pod.
Are auxiliary lamps road legal?
Many are for off-road and stage use only. Check the lamp's markings and cover or remove them on public roads as required.
Do I need a rain light for racing?
Most circuit championships require an approved rear rain light. See our race car regulations guide.
Planning a night setup?
Tell us your car and event and we will help you spec your lights.
📞 Call 0333 444 4304Shop lighting