Share
Wheel Spacers, Studs and Nuts: Fitting Them Safely
Spacers widen the track, clear big brakes and fill the arches. Fitted properly they are perfectly safe. Here is how to choose and fit them.
By Race Rally Supplies · 4 minute read
A wider track adds stability and grip, and spacers are often needed to clear bigger calipers or to correct the offset of new wheels. The key to fitting them safely is using the right type for your hub and the right length of stud or bolt.
Types of spacer
Slide over the existing studs. You will usually need longer wheel bolts or studs.
Bolt to the hub, then the wheel bolts to the spacer. Used where a slip-on spacer would be too thick.
The right length and seat for your wheels and spacers.
Shop studs and spacers →Fitting checklist
Hub and spacer faces clean and rust-free
Spacer is hubcentric for your hub size
Studs or bolts long enough for full thread engagement
Nut or bolt seat matches the wheel (taper or ball)
Torqued to the car maker's figure
Re-torqued after the first run
A wheel nut or bolt needs enough thread to hold the wheel. If a spacer leaves too little, fit longer studs or bolts.
Common questions
Are wheel spacers safe?
Yes, when they are hubcentric, made to a proper standard and fitted with the right hardware.
Do spacers affect handling?
A wider track generally adds stability. Very thick spacers change the steering geometry, so do not overdo it.
Will they clear my big brake kit?
Often that is exactly why people fit them. Measure the clearance before choosing a thickness.
Need spacers for your car?
Tell us your car, wheels and the clearance you need.
📞 Call 0333 444 4304Shop wheel spacers