Share
Building a Ford Escort Mk1 or Mk2 Rally Car: Where to Start
The Escort is still the definitive British rally car. Here is the order to build one, and the parts we would choose for each stage.
By Race Rally Supplies · 6 minute read
There is a reason Mk1 and Mk2 Escorts still fill historic and clubman entry lists: they are simple, tough and brilliant to drive, and the parts support is huge. The key to a good build is doing it in the right order, starting with a strong, straight shell.
Build in this order
Repair panels, seam welding, turret and suspension mount reinforcement before anything else.
A cage to your championship's regulations, tied into the strengthened points.
Front struts, rear axle location and a strong axle to put the power down.
A bias pedal box and uprated brakes to match the power.
Seats, harnesses, extinguisher, steering wheel and intercom.
Key parts
Pressed steel panels to restore a tired shell. Scuttle end panel · £118.49 →
Works-spec axle location and heavy-duty half shafts. Rix panhard tower kit · £156.49 →
Historic, clubman and modified classes have very different rules on engines, axles, suspension and brakes. Read the regulations for the class you want to run before buying parts.
More guides for your build
Common questions
Mk1 or Mk2?
Both share most running gear. The Mk1 is lighter and eligible for earlier historic classes; the Mk2 has more parts support for clubman builds.
Can I buy a ready-strengthened shell?
Call us; we can point you to shell and fabrication options.
Which fuel tank should I fit?
See our fuel tank guide, including the obp Escort tanks.
Building an Escort?
Tell us your class and budget and we will help you plan the parts list.
📞 Call 0333 444 4304Shop Escort parts